H2O Audio iN2 ユーザーズマニュアル

The most important feature of your H2O 
Audio Waterproof Housing is the removable 
T-Seal. 

The removable T-Seal is the main barrier 
between the harmful water and your iPod.

It is extremely important that special 
attention is paid to ensure the T-Seal is 
seating completely in all four corners and 
the Housings Contact Surface. If the T-Seal is 
dirty, out of alignment, twisted or pinched in 
any way it will compromise the integrity of 
the housing and should not be used.  

H2O Audio has provided an extra T-Seal 
(included) in the event of annually 
replacement, accidental damage, loss, 
overexposure to direct sunlight, or if the 
T-Seal has become misshaped though 
misuse.

1. Unlatch and open case.

3. To install a new or clean T-Seal, start at 
any corner, push the T-Seal into the corner 
and run your finger along the T-Seal 
pushing it into the Housing Contact 
Surface. 

4. Ensure the T-Seal is seated properly in 
all four corners and the Housing Contact 
Surface.

2. Starting at any corner, gently remove the 
T-seal. (Do not stretch or pull on T-Seal)