Biostar TForce4 U 775 オーナーマニュアル
Biostar T-Series
TForce U 775
User’s Manual
4
CHAPTER 2: HARDWARE INSTALLATION
2.1 I
NSTALLING
C
ENTRAL
P
RIOCESSING
U
NIT
(CPU)
A. Central Processing Unit (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation for
future use. When the CPU is removed, cover the Pin Cap on the empty
future use. When the CPU is removed, cover the Pin Cap on the empty
socket to ensure pin legs won’t be damaged.
pin cap
Step 1:
Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
Step 2:
Look for the triangular cut edge on socket, and the golden dot
on CPU should point towards this triangular cut edge. The CPU
on CPU should point towards this triangular cut edge. The CPU
will fit only in the correct orientation.
Step 2-1:
Step 2-1:
Step 2-2: