Biostar TForce4 U 775 オーナーマニュアル
Biostar T-Series
TForce U 775
User’s Manual
5
Step 3:
Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 4: Put the CPU Fan and heatsink assembly on the CPU
and buckle it on the retention frame. Connect the CPU FAN
and buckle it on the retention frame. Connect the CPU FAN
power cable into the JCFAN1. This completes the installation.
B. About FAN Headers
CPU FAN Pow er Header: JCFAN1
System Fan Power Headers: JSFAN2
North Bridge Fan Pow er Header: JNBFAN1
System Fan Power Headers: JSFAN2
North Bridge Fan Pow er Header: JNBFAN1
JCFAN1:
Pin Assignment
1 Ground
2 +12V
3
2 +12V
3
FAN RPM rate
sense
4 Smart
Fan
Control
JNBFAN / JSFAN1,2
Pin Assignment
1 Ground
2 +12V
2 +12V
JCFAN1
4
1
JSFAN2
1 3
JNBFAN1
3
1
JSFAN1
1
3
3
FAN RPM rate
sense
Note:
JCFAN1 reserves system coolin g fan with Smart Fan Control utilities. It
supports 4 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be
JCFAN1 reserves system coolin g fan with Smart Fan Control utilities. It
supports 4 pin head connector. When connecting with wires onto
connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be
connected to GND.