West Bend 76630 - Smoothie Autoserve II オーナーマニュアル

Before assembling your smoothie maker, wash all parts, 

except for the motor base 

in warm, soapy water, rinse thoroughly and dry.  Unscrew and disassemble the valve 
for cleaning (see Cleaning Your Smoothie Maker section).  To prolong the life of your 
smoothie maker, 

do not wash parts in the dishwasher. 

1.  Position the rubber gasket down onto the circular flat surface in the blade base. 

2.  Screw the blade base on the bottom of the blending jar by turning the blade 

base counter-clockwise until tightened.  Make sure that the blade base is tightly 
fastened to the blending jar and that the rubber gasket is properly compressed 
between the blending jar and the blade base. 

3.  Place the lid onto the top of the blending jar.  The lip on the lid should line up 

with the pour spout on the container.  Place the lid cap in the center of the lid or 
place the stir stick through the center of the lid if blending liquids or frozen 
drinks.   

4.  Place the blending jar onto the motor base so the bottom of the blade base is 

sitting flat on the motor base.   

5.  Plug in the cord.   

6.  Your smoothie maker is now ready to use.   

 

 

4