West Bend 76630 - Smoothie Autoserve II オーナーマニュアル

 

“OFF” – Turns the appliance off. 
 
“LO” - runs the appliance at low speed.  This speed should 
be used for the initial 30 seconds of mixing. 
 
“HI” – Runs the appliance at high speed.  This speed should 
be used for the final stages of mixing. 
 
“PULSE” - gives short bursts of power at high speed.  Use 
“PULSE” to begin the mixing of ice and other hard ingredients. 
 
Note:  The dispensing speed “LO”, automatically engages when the auto-powered 
dispensing button is pushed. 
 
The AutoServe

™ 

II blending jar is conveniently marked to create perfect smoothies.  

To make your favorite frozen drinks, follow the steps below. 

 

1.  ADD LIQUIDS – Add any combination of liquid ingredients up to the “LIQUIDS” 

mark under “SERVES 2” or “SERVES 4” located on the blending jar.  Liquids 
include any soft ingredients such as fruit, milk, fruit juice, herbal supplements, or 
yogurt.

 

2.  ADD ICE – Add ice or frozen ingredients until the total level reaches the 

“FROZEN INGREDIENTS” line on the side of the blending jar.  Frozen 
ingredients include ice, frozen fruit, frozen yogurt, ice cream, etc. 

3.  SMOOTH IT – With the lid locked in place and the stir stick 

(use as directed below) set in the hole in the lid, pulse the 
mixture 2 or 3 times by pressing the “PULSE” button.  Next, 
push the “LO” button and mix for 20-30 seconds.  Push the 
“HI” button for the final 10-15 seconds of mixing.  

STIR STICK OPERATION – When in use and while the 
appliance is running, stir or rotate the Stir Stick in a counter-
clockwise direction so that the Stir Stick scrapes or contacts 
the sides of the blending jar.  This stirring operation will aid 
in mixing the contents of the blending jar by forcing the 
ingredients into the mixing blades. 

 

 

5