Raritan Engineering Command Center CC-SG ユーザーズマニュアル
C
HAPTER
6:
C
ONFIGURING
P
ORTS AND
P
ORT
G
ROUPS
79
3. Click the Configure button that corresponds to the serial port line item you wish to configure.
The Configure Serial Port screen appears.
Figure 95 Configure Serial Ports Screen
4. Type a port name in Port Name field. For ease of use, you should name the port after the
server that is connected to the port.
5. Click on the Application Name drop-down arrow and select an application name.
6. Click on the Baud Rate drop-down arrow and select a rate.
7. Click on the Parity/Data Bits drop-down arrow and select a parity value.
8. Click on the Flow Control drop-down arrow and select a flow control value.
9. Click on the Associate Device drop-down arrow and select a Generic device, IPMI Server, or
6. Click on the Baud Rate drop-down arrow and select a rate.
7. Click on the Parity/Data Bits drop-down arrow and select a parity value.
8. Click on the Flow Control drop-down arrow and select a flow control value.
9. Click on the Associate Device drop-down arrow and select a Generic device, IPMI Server, or
Powerstrip, which will be associated with this Serial port. When a Generic device is
associated with a Serial port, it looks like this in the Devices tree:
associated with a Serial port, it looks like this in the Devices tree:
Figure 96 Associated Generic Device with a Serial Port
10. Select the associated category and element from the Port Associations table.