Raritan Engineering Command Center CC-SG ユーザーズマニュアル

80 C

OMMAND

C

ENTER 

S

ECURE 

G

ATEWAY 

A

DMINISTRATOR 

G

UIDE

 

 

 

 

11. Click In-Band Parameters if you want to allow in-band access for this Serial port.  

 

12. Click on the In-band application drop-down arrow and select either RemoteDesktop 

Viewer,  SSH Client,  VNC Viewer. Type the IP address of the target associated with this 
port in the Target IP Address field, type the port used by the In-band application in Target 
TCP Port, and type a username that is used to login to the in-band application in the Target 
Username field. Click OK to save the In-band parameter settings or Cancel to exit without 
saving.  

13. Click  OK to configure the serial port or Cancel to exit without configuring. A Port 

Configured Successfully message confirms that the port has been created. 

14. Repeat steps 1 through 11 to configure other serial ports.