Chaparral VFS113 ユーザーズマニュアル

Select Ethernet Config and press Enter.

The Network Management System Console screen displays.

From here you can access the LAN settings. Each screen and its settings are 
described briefly in the following sections. These settings are intended for use by 
experienced network administrators. Refer to your operating system documentation 
for more information about these settings.

Option 1 from the Network Management System Console screen displays the System 
Configuration screen. 

Table D-1 describes the settings you can change here. 

Table D-1. System Configuration screen settings

1

System name

Name of the router as seen by other systems on the network. 
You can enter up to 80 characters. Default is router fxxxxx 
where xxxxx is the last 5 digits of the MAC address.

2

System Contact

Name of a contact person responsible for the router. You can 
enter up to 80 characters.