Champion Manufacturing DH2000 ユーザーズマニュアル

 

wall

wall

To convert track guides and door-lift for corner operation:

1.  Remove the rack guide (A); save the fasteners.  

Move (A) and re-attach as shown in the illustration at right.

2.  Slide a dish rack through the machine to check the guide to 

dish rack clearance. The dish rack should move smoothly 

without binding or tipping on the guides.

3.  Disconnect the door-lift bracket (B) connecting the front door 

and the wall-side door and discard. To seal the holes,  

Re-install the bolts and lockwashers that held the bracket. 

4.  Disconnect the door linkage arm (C) from the wall-side door 

and discard. Re-install the white roller (D) and hardware.

5.  Disconnect the door linkage arm (C) from the other door but 

do not discard.

6.  Lift the door handle up and back until the springs relax.  
7.  Adjust the door spring hooks (E) located at the rear of 

dishwasher to reduce door spring tension until the front and 

side doors open and close without binding.