Champion Manufacturing DH2000 ユーザーズマニュアル

The installation of your dishwasher must be performed by qualified service personnel.  

Problems due to improper installation are not covered by the Warranty. 

1.  Inspect the outside of the dishwasher carton for signs of damage.
2.  Remove the carton and inspect the dishwasher for damage.
3.  Check for any accessories that may have shipped with your dishwasher.
4.  Turn to the front of this manual and complete the warranty card.  

Immediately mail the warranty card to validate your warranty.

5.  Move the dishwasher near its permanent location. 

Be careful when lifting and moving the dishwasher to prevent damage to the machine. 

The installation of the dishwasher must comply with local health codes. 

6.  Compare the installation site utility connections with the dishwasher utility connections and 

make sure that they are the same.

7.  Place the dishwasher in its permanent location.
8.  The dishwasher has 4 adjustable feet for leveling.
9.  Level the dishwasher front-to-back and  

side-to-side.

10.  The dishwasher can be installed in a  

straight-through or a corner configuration.

11.  The typical dishwasher load height is 33¾" [86cm].
12.  The machine height is 65¼" [166cm].
13.  The dishwasher doors require an  

open height of 76¾" [195cm] and  

86" [218cm] for door removal.

17¼"

[44cm]

33¾"

[86cm]

76¾"

[195cm]

65¼"

[166cm]

26⅛"

[66cm]

Load 

Ht.

Machine

Ht.

Door Up

Ht.

86"

[218cm]

Door

Removal 

Ht.

Inside

Clearance