ZTE ZXHN H108L メンテナンスマニュアル
Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION
15
F
I G U R E
6
T
H E
I
N T E R F A C E
S
E T U P
P
A G E
Three sub-pages are under the Interface Setup page, which are
Internet, LAN and Wireless.
Internet, LAN and Wireless.
Internet Configuration
By default the Interface Setup page displays the Internet
configuration page as shown in Figure 6.
configuration page as shown in Figure 6.
ATM VC and ATM Qos
Asynchronous transfer mode (ATM) is a protocol that arranges data
into small, uniform-sized cells with VCI data, as opposed to variable-
sized data packets. ATM settings are used to connect to ISP. ISP
provides the VPI and VCI setting information. The users of ZXHN
H108L can configure up to 8 virtual circuits (VC), each using
into small, uniform-sized cells with VCI data, as opposed to variable-
sized data packets. ATM settings are used to connect to ISP. ISP
provides the VPI and VCI setting information. The users of ZXHN
H108L can configure up to 8 virtual circuits (VC), each using