Zoom H22 ユーザーズマニュアル
Stereo Mode Recording
ZOOM H2
22
●
SURROUND 4CH (4-channel mode)
Stereo sound from the front side and stereo
sound from the rear side of the unit is recorded
in 4 channels. The H2 switches to 4-channel
mode (
sound from the rear side of the unit is recorded
in 4 channels. The H2 switches to 4-channel
mode (
→
p. 27).
●
REAR 120º (stereo mode)
Sources located within a 120-degree angle on
the rear side of the unit are recorded in stereo.
the rear side of the unit are recorded in stereo.
Which set of mics is currently active is
indicated by the [MIC ACTIVE] indicator on
the front panel and rear panel of the H2.
indicated by the [MIC ACTIVE] indicator on
the front panel and rear panel of the H2.
When you select SURROUND 2CH or 4CH,
both the front and rear panel [MIC ACTIVE]
indicator will be lit.
both the front and rear panel [MIC ACTIVE]
indicator will be lit.
NOTE
• The mic pattern setting only applies to the
built-in mics. It has no effect when an
external mic is used.
external mic is used.
• When anything is plugged into the [EXT MIC
IN] jack or [LINE IN] jack, the built-in mics
are deactivated and all mic pattern
indicators are out.
are deactivated and all mic pattern
indicators are out.
• While the H2 is in the playback, recording, or
recording standby condition, the mic pattern
setting cannot be changed.
setting cannot be changed.
[MIC ACTIVE] indicator
[MIC ACTIVE] indicator
H2 front panel
Lit
Lit
H2 rear panel
H2-E.fm 22 ページ 2007年7月11日 水曜日 午後3時19分