Zhone IMACS-200 ユーザーズマニュアル
10-2
OHSU Ports
Model No.
Running Head
10.2.2 OHSU port Cables
The OHSU port utilizes 50 um or 62.5 um optical fiber cables with BFOC12.5 (ST)
connectors. A separate transmit and receive fiber is required for each port.
connectors. A separate transmit and receive fiber is required for each port.
10.3
OHSU port User Screens and Settings
The OHSU ports permit configuration and operation through use of several user screens and
optional settings.
optional settings.
10.3.1 OHSU port Main Screen
You must configure the OHSU port ports for operation. Configuration can be performed from
the OHSU port Main Screen, which is shown in Figure 10-2. To access that screen, highlight
the desired port in the System Main Screen and press <Enter>.
the OHSU port Main Screen, which is shown in Figure 10-2. To access that screen, highlight
the desired port in the System Main Screen and press <Enter>.
Figure 10-2.Typical OHSU port Main Screen
The bottom highlighted line on this screen lists several actions you can perform from the
screen. To perform an operation, simply press the uppercase letter associated with the desired
action. For example, to save your option settings, type “s”. Table 10-1 lists the actions you can
perform.
screen. To perform an operation, simply press the uppercase letter associated with the desired
action. For example, to save your option settings, type “s”. Table 10-1 lists the actions you can
perform.