Viking Huskylock 936 ユーザーズマニュアル
1
2
3
4
5
6
7
8
9
D
A
B
C
D N
D N
—16—
Thread the machine in the following order:
Upper looper ( A )
Lower looper ( B )
Needles ( C,D )
Upper looper ( A )
Lower looper ( B )
Needles ( C,D )
3-1. Upper looper threading ( A )
1. Set the upper looper to the highest position
1. Set the upper looper to the highest position
by turning the handwheel toward you.
2. Raise the presser foot.
3. Open front cover.
4. Pull thread from spool through guide
3. Open front cover.
4. Pull thread from spool through guide
➀
of the
thread stand and then through guides
➁
to
➈
.
When using decorative thread, move the thread
guide for decorative thread (B) to the right(D),
then thread through thread guide.
guide for decorative thread (B) to the right(D),
then thread through thread guide.
When using regular thread, move the thread
guide for decorative thread (B) to the left(N).
guide for decorative thread (B) to the left(N).
5. Thread the eye
➈
of the upper looper.
6. Pull a thread tail leaving about 10 cm (3” to
4”) long.
Note:
For all sewing except 2-thread sewing, set the
2-thread converter as illustrated.
3. THREADING (For four thread overlock stitch)
Spun thread
Decorative thread
10 cm
9