Valco electronic Valve Oven ユーザーズマニュアル

Chapter 2

Installing Valves in the Valve Box

This version of Valve Oven is used when any valves heating is required.

This option is analogous to the Valve Oven but without heating elements.

 

Hence, for the valves installation procedure, follows all the steps described 
previously for the heated oven and unheated compartment.

Refer to:

•

•

This option does not contain any heating elements. Besides, it is designed to 
accomodate only up to two valves.It does not include any electronics and the 
solenoid valves controlling the valves actuators are droven by the TRACE GC 
Ultra.

 

The solenoid valves are connected to the timed event output located on the Mother 
Board of the TRACE GC Ultra.

— Sampling Valve 1 must be connected to 

J51

— Sampling Valve 2 must be connected to 

J52

Then, the valves installation follows the same procedure described previously for 
the heated oven and unheated compartment.

Refer to:

•

•