SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル

4-4

This section describes how to enter CLI commands.

A CLI command is a series of keywords and arguments. Keywords identify 
a command, and arguments specify configuration parameters. For 
example, in the command “show interfaces status ethernet 1/5,” show 
interfaces and status are keywords, ethernet is an argument that specifies 
the interface type, and 1/5 specifies the unit/port.

You can enter commands as follows:

•

To enter a simple command, enter the command keyword. 

•

To enter multiple commands, enter each command in the required 
order. For example, to enable Privileged Exec command mode, and 
display the startup configuration, enter:

Console>enable

Console#show startup-config

•

To enter commands that require parameters, enter the required 
parameters after the command keyword. For example, to set a 
password for the administrator, enter:

Console(config)#username admin password 0 smith

The CLI will accept a minimum number of characters that uniquely 
identify a command. For example, the command “configure” can be 
entered as con. If an entry is ambiguous, the system will prompt for 
further input.