SmartBridges sB3010 ユーザーズマニュアル

 

 

 

Page 27 of 80 

 

i n t e l l i g e n t     w i r e l e s s     p l a t f o r m

 

airHaul™ Nexus User Guide

 

 
The airHaul unit is configured in Root Bridge mode for use as a Root device. This section provides 
information on configuring in this mode. 
 

 

The Ethernet (wired-side) parameters need to be configured for the Root Bridge device to 
communicate with the wired LAN network. The airHaul Nexus unit supports two Ethernet ports 
configured as a bridge. The Ethernet Configuration provides configuration for the bridge IP 
parameters. 
 
Follow the steps below to change the Root Bridge Ethernet Configurations: 

 

1. From 

the 

Summary Information page, click on the Ethernet Configuration link. 

 
2.  Enter a new IP Address,  IP Mask,  Gateway and DHCP

 

status (checked if it is enabled, 

otherwise uncheck to disable it). If DHCP is checked the IP address will be assigned by the 
DHCP server in the network. If there is no DHCP server, the device will revert to the previous 
IP address after 60 seconds.  

 

3.  Click on the Apply Changes button to change the settings.