SmartBridges sB3010 ユーザーズマニュアル

 

 

 

Page 28 of 80 

 

i n t e l l i g e n t     w i r e l e s s     p l a t f o r m

 

airHaul™ Nexus User Guide

 

 

The wireless parameters need to be configured for the Root Bridge device to communicate with other 
airHaul Remotes. 
 
Follow the steps below to change the Root Bridge Wireless Configurations: 

 

1. From 

the 

Summary Information page, click on the Wireless Configuration link. 

 
2. The 

Radio Configuration page will appear, click on the Wireless Settings link. 

 

3. Enter 

the 

SSID of the unit and select the channel.  

 

4.  Enter the Remote unit radio’s MAC address in the Client Authorization MAC and designate 

it as a Bridge or Router. The Client Authorization MAC setting is an ACL and it allows the 
root device to filter client MAC for association. 

 

5.  Select the Transmit power of the radio from Dial-in-Power drop down menu. 

 

6.  Select the gain of the antenna from the drop down menu as per the gain of the antenna being 

used with the equipment. 

 

7.  Enter the RF cable loss based on the cable specifications. 

 

8.  Click on the Apply Changes button to change the settings. 

 

 

 

Figure 2-15 Root Bridge Wireless Settings