Simaudio HDS-8 ユーザーズマニュアル

 

Front Panel Controls 

 

 

 

Figure 1:  MOON HDS-8 Front panel 

 

The front panel will look similar to Figure 1 (above).   
 
The “Standby” button places the HDS-8 into or out of operation. When operational, the blue pilot LED will illuminate. The 
input buttom allows you to sequentially select from one of the five HDMI inputs. Each HDMI input has an associated red LED 
that will illuminate when that particular input has been selected. Finally, directly below the 3

rd

 HDMI pilot LED is the infra-red 

remote sensor. 

 
 

Rear Panel Connections 

 

 

 

Figure 2:  MOON HDS-8 Rear panel 

 

The rear panel will look similar to Figure 2 (above). 
 
There is one HDMI output labelled “HDMI OUT” and five HDMI inputs, labled ‘1’ through ‘5’’.  To the right of the HDMI inputs, 
there is an RS-232 port for full-function bi-directional control and status intended for custom integration or automation type 
applications. As well, there is a 12V trigger input/output on 1/8” mini-jacks. Finally, on the far right is the “AC Power” section 
with a main power switch (“0”=off, “1”=on) and the IEC receptacle for the included AC power cord.

 

 
 
 
 

____________________________________________________________________________________ 

 

Front Panel Controls  /  Rear Panel Connections                 

 

 

 

       7