Siemens Network Hardware D410 ユーザーズマニュアル

 

Commissioning (software) 

 

4.6 Using drive-related I/Os by SIMOTION 

D410 
Commissioning Manual, 08/2008 Edition 

105

 

Table 4-10  Global measuring inputs, configuration of the Measuring Input TO 

Axis measuring system no.  Under axis measuring system number, enter the number of the used 

encoder system (namely, encoder 1, 2 or 3). Encoder system 1 is the 

default setting. 

Global measuring 

Activate the checkbox when a global measuring input is used. 
Enter here the logical HW address and the bit number of the used 

input. 
Start address message frame 39x + 3, bit 1 for input DI/DO 9 
Start address message frame 39x + 3, bit 2 for input DI/DO 10 

Logical hardware address 

and bit number: 

Start address message frame 39x + 3, bit 3 for input DI/DO 11 

Detailed information is contained in the 

SIMOTION Motion Control Output Cams and 

Measuring Outputs

 Function Manual.  

4.6.8 

Outputs of cam outputs and probe inputs on TM15/TM17 High Feature 

Quantity framework for TM15/TM17 High Feature 

The TM15/TM17 High Feature Terminal Modules can be used to extend the number of 

outputs for cam outputs and probe inputs that can be installed. 
●  TM15, maximum 24 outputs for cam outputs / probe inputs 
●  TM17 High Feature, maximum 16 outputs for cam outputs / probe inputs 

Additional references 

Detailed information for the configuration is contained in the following documents 
●  SIMOTION Output Cams and Measuring Inputs Function Manual 
●  TM15/TM17 High Feature Terminal Modules Commissioning Manual