Siemens Network Hardware D410 ユーザーズマニュアル

 

Maintenance and service 

 

5.4 SIMOTION CompactFlash Card 

D410 
Commissioning Manual, 08/2008 Edition 

131

 

5.4 

SIMOTION CompactFlash Card 

5.4.1 

Replacing the CompactFlash Card 

Prerequisite 

 

 

Note 
Always power down the unit before you insert or remove the CompactFlash Card! 
The RDY LED on the SIMOTION D410 flashes in green color as long as any application is 

accessing the CompactFlash Card (see the chapter "Fault and status displays"). 

 

Procedure 

How to replace the CompactFlash Card:  
1.  Shut down the power supply. 
2.  Remove the CompactFlash Card from the card slot of SIMOTION D410. 
3.  Hold the card between your thumb and finger on the gripping cavity and then pull it out. 
4.  Insert the new CompactFlash Card into the card slot. Push it in all the way with slight 

pressure until it engages. The insertion direction of the CompactFlash Card is identified 

by an arrow on the card and a matching arrow on the slot. 
The properly inserted card does not protrude from the SIMOTION D410 housing. 

5.  Restart the power supply. 

5.4.2 

Writing and deleting data on CompactFlash Cards 

Overview 

You have the following options of writing data to a CompactFlash Card: 
●  Saving technology and user data to the CompactFlash Card 

The programming device / PC must be online to SIMOTION D410 in order to execute this 

function. 

●  Saving data from the programming device / PC to the CompactFlash Card. 

This function requires a CompactFlash Card adapter.  

 

 

 

Note 
CompactFlash Card are always shipped in formatted state. 
Trouble-free operation of the CompactFlash Card can only be guaranteed if you do not 

modify its partitioning.