Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

MC35_ATC_01_V04.00

Page 203 of 238

02.04.2002

This command can be used to flick through the active phonebook records in alphabetical order by
name.
CAUTION: The AT^SBPS command is intended for reading only. For example, it helps you find en-
tries starting with matching characters. However, do not use the listed index numbers to dial out or
modify entries.

Test command

AT^SPBS=?

Response

^SPBS: (list of supported <value>s)

Parameter

See write command

Write command

AT^SPBS=
<value>

Parameter

<value> 1 to make a step downward in the alphabetically sorted phonebook

2 to make a step upward in the alphabetically sorted phonebook

Response

If <value>=1
TA steps down one entry.
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>
^SPBS: <index4>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK

If <value>=2 (after <value>=1)
TA steps up one entry.
^SPBS: <index1>,<number>,<type>,<text> <CR,LF>
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK

If error is related to ME functionality:
+CME ERROR: <err>
The response parameters are explained in the specification of the “AT^SPBG”
command.

Reference
Siemens

Note

This command can be used for the ME, SM and FD phonebook.