Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

MC35_ATC_01_V04.00

Page 204 of 238

02.04.2002

Test command

AT^SPIC=?

Response

OK
If error is related to ME functionality:
+CME ERROR: <err>

Parameter

Execute command

AT^SPIC

TA returns the number of attempts still available for entering a required password,
e.g. the PIN, PUK, PH-SIM PUK etc. To check whether or not you need to enter a
password use the “AT+CPIN?” command.

Response

If error is related to ME functionality:
+CME ERROR: <err>

Parameter

<counter> Number of attempts counted down after each failure.

Reference

Siemens

Note

•  When entering the SIM PIN or PUK you have a maximum of three attempts to

enter each number.

•  For passwords associated to the phone lock ("PS" lock set by client or factory)

or other factory set locks, such as "PF", "PN", "PU", "PP", "PC" the number of
attempts is subject to a timing algorithm explained in Chapter 4.35.1. If these
passwords are incorrectly entered the counter first returns 3, 2 and 1 remaining
attempt(s), but then gives the total number of attempts which amounts to 63
(see example below).

•  See also Chapters 4.21, 4.35 4.36, 4.38, 8.13 for further information on locks

and passwords.

Example

Though a mobile is locked to a specific SIM card (phone lock), the client attempts
to operate it with another SIM card. The client correctly enters the SIM PIN of the
SIM card currently inserted, but then fails to give the "PS" lock password (PH-SIM
PUK):

at+cpin=9999

OK

at+cpin?

+CPIN: PH-SIM PIN

ME is waiting for the phone lock password

OK

at^spic

^SPIC: 3

OK

at+cpin=4711

+CME ERROR: PH-SIM PIN required

at+cpin=4712

+CME ERROR: incorrect password