Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 30 of 238
02.04.2002
2.30 ATV Set result code format mode
Write command
ATV[<value>]
Response
This parameter setting determines the contents of the header and trailer transmit-
ted with result codes and information responses.
ted with result codes and information responses.
When
<value> =0
0
When
When
<value> =1
OK
Parameter
<value>
0 Information response:
<text><CR><LF>
Short result code format:
<numeric code><CR>
1 Information response:
<CR><LF><text><CR><LF>
Long result code format:
<CR><LF><verbose code><CR><LF>
Reference
V.25ter
Note
In case of using the command without parameter <value> will be set to 0.
Information responses described in chapter 9 (verbose code and numeric code).
Information responses described in chapter 9 (verbose code and numeric code).
2.31 ATX Set CONNECT result code format and call monitoring
Write command
ATX[<value>]
Response
This parameter setting determines whether or not the TA detects the presence of
dial tone and busy signal and whether or not TA transmits particular result codes.
OK
dial tone and busy signal and whether or not TA transmits particular result codes.
OK
Parameter
<value>
0
CONNECT result code only returned, dial tone and busy de-
tection are both disabled
tection are both disabled
1
CONNECT<text> result code only returned, dial tone and busy
detection are both disabled
detection are both disabled
2
CONNECT<text> result code returned, dial tone detection is
enabled, busy detection is disabled
enabled, busy detection is disabled
3
CONNECT<text> result code returned, dial tone detection is
disabled, busy detection is enabled
disabled, busy detection is enabled
4
CONNECT<text> result code returned, dial tone and busy de-
tection are both enabled
tection are both enabled
Reference
V.25ter
Note
Related <text> see chapter 9.1.5.