Sharp Water Dispenser PN-L601B ユーザーズマニュアル

14

E

The drawn shape will be determined as an object 0.5 second* after you lift the touch pen from the board. If you start drawing 

another object within 0.5 second* after you lift the touch pen from the board, the drawn shapes will be determined to be a single 

object even though they are separate.

* This period can be changed. (Page 34)

Draw a shape.

Draw another shape.

Both shapes are determined 

as a single object.

Less than

0.5 second

After

0.5 second

TIPS

•  You can switch through “Pen 1” to “Pen 3” and “Eraser” by repeatedly pressing Function Button 2 of the touch pen. 

(You will not be able to switch to functions that have been hidden due to the factory default settings or toolbar customization.)

To change functions using Function Button 2, select the touch panel driver “Properties”, and set “Function Button 2” to “Pen

Software Link” on the “Operation Setting” tab.

•  For details about objects, refer to page 20.

•  In certain cases, such as when a button on the toolbar is touched, the drawn shape will be fixed as an object before the

specified time elapses after the touch pen is lifted from the board.

•  When “Pen Drawing” is set to “Both touch pen and finger”, you can draw with your finger.

n

The “Pen 1” to “Pen 3” palettes can be used to change the pen function settings.

To display the palette, touch the button of the selected pen once again.

(1)

(2)

(1) Check this box to make the line translucent.

The pen icon changes when this setting is enabled.

(2) Set the color and thickness of the line. 

The palette is closed. 

To use a pen of a different color and thickness, click (3) and select.

TIPS

•  The method of closing the palette can be changed. (Page 34)

(3)