Sharp Water Dispenser PN-L601B ユーザーズマニュアル

15

E

The part you move over is erased.

TIPS

•  You can switch through “Pen 1” to “Pen 3” and “Eraser” by repeatedly pressing Function Button 2 of the touch pen. 

To change functions using Function Button 2, select the touch panel driver “Properties”, and set “Function Button 2” to “Pen

Software Link” on the “Operation Setting” tab.

•  The eraser function can erase only the objects drawn with the pen function. You cannot use the “Eraser” button to erase

pasted images. You cannot use it either to erase the edges of a line to make the line thinner. Even if you erase the edges

only, the entire width of the line will be erased.

•  An object drawn with the pen function cannot be erased if it is part of a group.

•  The display may changes as follows when the “Eraser” button is selected in the overlay mode. The display returns to normal

when the function other than the “Eraser” button is selected.

- The computer screen in the background is hidden even by translucent objects.

- An object is surrounded with a white line.

•   When using a PN-L series interactive display, the following functions can be used: 

If “Auto Pen/Eraser Mode Switching” is enabled (Page 34), you can erase with the eraser or your finger when “Pen 1” to “Pen 3”

or “Eraser” is selected. Touch the screen with the eraser or your finger, and after the cursor changes to the eraser, move the

eraser or your finger. You can set the eraser size for erasing with the eraser or your finger to the touched area of the screen,

or to the size selected on the palette.

n

The size of the eraser can be changed by selecting it from the palette for the “Eraser” button.

To display the palette, touch the

“Eraser” button again while it is in the selected state.

TIPS

•  The method of closing the palette can be changed. (Page 34)