Sennheiser Water System SDC 8200 SYS-M ユーザーズマニュアル

Getting to know the software

11

The S-VD software module allows you to display voting results as bar or pie
diagrams, for example using a projector or several large screens in the
conference room. 

For this, you also need the S-MM and S-VM software modules.

The IM software module is the software you require in order to configure,
monitor and control the interpretation system from your PC. With the
IM software module, you can:

y configure all parameters of the interpretation system,
y operate the interpretation system and monitor the status of the

interpreter consoles,

y send short text messages to the interpreters.

When purchasing the software, you also purchase licenses for one or
several software modules. All licensed software modules are activated
automatically when you install the software.

You can upgrade your license(s) at any time to include additional software
modules (see “Upgrading the software license” on page 108).

If you license additional software modules, the corresponding menus
and buttons appear automatically. Please note that the menus and
buttons of 

all 

software modules are shown in this manual – including

those for which you have possibly no license.

When purchasing the software, you also receive a dongle (hardware
license key). This dongle releases all licensed software modules for use on
all PCs in your network and must therefore be inserted into a free USB port
(or parallel port) of the master PC.

If the dongle is not inserted at startup, the “Hit CR to abort:” dialog box
opens (see “Starting the “Confsys”program for the first time” on
page 18). 

If the dongle is inserted but cannot be detected due to the program
configuration, the “Waiting for master...” dialog box opens (see “Setting
the correct starting options” on page 19).