Sea Frost DC 5000 ユーザーズマニュアル
19
CABLE TIES
Cable Ties should be used to support the wiring, tubing, and insulation. There is a
screw hole in the end of each tie that is used for mounting. Loosely loop the tie, mount
the screw loosely, snug the wrap, tighten the screw, and trim the excess. Be sure not
to leave a sharp end on the cable tie.
ELECTRICAL SYSTEM
The electrical system for the DC 5000 system includes a Thermostat Control Panel with
pilot light, and a junction box with solenoid.
Cable Ties should be used to support the wiring, tubing, and insulation. There is a
screw hole in the end of each tie that is used for mounting. Loosely loop the tie, mount
the screw loosely, snug the wrap, tighten the screw, and trim the excess. Be sure not
to leave a sharp end on the cable tie.
ELECTRICAL SYSTEM
The electrical system for the DC 5000 system includes a Thermostat Control Panel with
pilot light, and a junction box with solenoid.