Sea Frost 372 ROUTE ユーザーズマニュアル

 

1 

 

372 ROUTE 4 BARRINGTON, NH  03825 USA 

TEL (603) 868-5720   

FAX (603) 868-1040  

1-800-435-6708  

E-Mail:sales@seafrost.com 

 

        www.seafrost.com 

 

 

  

SEA FROST BD 12 OR 24 VOLT D.C. SYSTEM 

With Water Cooling Option 

  
CONDENSING UNIT LOCATION AND MOUNTING 
 
The water-cooling option should be considered supplemental cooling.  Installation 
should proceed with a proper air-cooled installation first. The water-cooling feature 
should be used to enhance efficiency on occasions when cold-water temperatures are 
encountered or interior cabin air temperatures are extreme. 
 
The design of the Sea Frost BD allows placement in an enclosed space such as a cabin 
locker or sail locker.  Intake air should be drawn in from the cabin area to insure the 
coolest, driest air supply.  Standard 4" duct hose may be used.  Discharge may need to 
be vented to allow warm air to escape.  Intake ducting from the exterior of the boat may 
cause damp salt air to be drawn in which might reduce the life of your BD.  This will also 
increase below deck moisture.   ALLOW 1.5" CLEARANCE BETWEEN THE 
CONDENSER (BACK VENT AREA) AND ANY BULKHEAD TO INSURE PROPER 
AIRFLOW THROUGH THE CONDENSER.