RuggedCom Welder RS400 ユーザーズマニュアル
VLANs
RS400
179
ROS™ v3.5
The VLAN Identifier is used to identify the VLAN in tagged Ethernet frames according to IEEE
802.1Q.
802.1Q.
VLAN Name
Synopsis: Any 19 characters
Default:
The VLAN name provides a description of the VLAN purpose (for example, Engineering VLAN).
Synopsis: Any 19 characters
Default:
The VLAN name provides a description of the VLAN purpose (for example, Engineering VLAN).
Forbidden Ports
Synopsis: Any combination of numbers valid for this parameter
Default: None
These are ports that are disallowed to be members of the VLAN.
Examples:
None - all ports of the switch are allowed to be members of the VLAN
2,4-6,8 - all ports except ports 2,4,5,6 and 8 are allowed to be members of the VLAN
Synopsis: Any combination of numbers valid for this parameter
Default: None
These are ports that are disallowed to be members of the VLAN.
Examples:
None - all ports of the switch are allowed to be members of the VLAN
2,4-6,8 - all ports except ports 2,4,5,6 and 8 are allowed to be members of the VLAN
IGMP
Synopsis: { Off, On }
Default: Off
This parameter enables or disables IGMP Snooping on the VLAN.
Synopsis: { Off, On }
Default: Off
This parameter enables or disables IGMP Snooping on the VLAN.
MSTI
Synopsis: 0 to 16
Default: 0
This parameter is only valid for Multiple Spanning Tree Protocol (MSTP) and has no effect, if
MSTP is not used. The parameter specifies the Multiple Spanning Tree Instance (MSTI) that the
VLAN should be mapped to.
MSTP is not used. The parameter specifies the Multiple Spanning Tree Instance (MSTI) that the
VLAN should be mapped to.
Note: If IGMP Snooping is not enabled for the VLAN, both IGMP messages and multicast streams will be
forwarded directly to all members of the VLAN. If any one member of the VLAN joins a multicast
group then all members of the VLAN will receive the multicast traffic.
group then all members of the VLAN will receive the multicast traffic.