Perlick DS ユーザーズマニュアル

Direct Draw Dispensers Self-Contained

Direct Draw Dispensers Self-Contained

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice 

Form No.Z2278

Rev. 11.29.10

 

■ Place one brown leather washer into black 

beer line connector hose on hex nut side. 

Screw connector to stainless steel beverage 

line on faucet standard. Tighten with a 

wrench, but do not over tighten.

 

■ Make sure level handle on the keg coupler 

is in the UP (untapped) position. Place one 

brown leather washer into wing nut end of 

black beer line connector hose and thread 

onto top of keg coupler. Hand tighten.

 

■ Place clamp on one end of red air line. Push 

end over air valve located inside cabinet. 

Tighten clamp with screwdriver. Turn shut-off 

valve to OFF (horizontal) position.

 

■ Place clamp on the other end of red air line 

and push over tailpiece on coupler. Tighten 

clamp with screwdriver.

 

■ Be sure beer faucet is in closed position.

 

■ Align keg lug with lug openings on bottom of 

coupler.

 

■ Turn clockwise 1/4 turn. Pull handle out and 

down. Keg is now tapped.

 

■ Open shut-ff valve on air divider located 

inside of the cabinet.

OUT

DOWN

1/4

TURN

OUT

DOWN

1/4

TURN

OUT

DOWN

1/4

TURN

Direct Draw Dispensers Self-Contained

The cabinet must be connected to a separately 

fused power source (see electrical specification 

plate) and grounded in accordance with National 

and Local Electrical Codes.