Perlick DS ユーザーズマニュアル

Direct Draw Dispensers Self-Contained

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice 

Form No.Z2278

Rev. 11.29.10

Direct Draw Dispensers Self-Contained

One of the most common causees of dispensing problems is improper temperature. Draft beer should 

be stored at a temperature between 32°F and 38°F. At warmer temperatures, beer will foam.

At temperatures lower than 30°F, beer will freeze. When beer freezes, the alcohol in the beer may 

separate and cause the beer to be cloudy with an “off” taste.

28°

30°

32°

34°

36°

38°

40°

44°

42°

The temperature control is inside the cabinet on 

the right-hand side of the evaporator fan panel 

assembly. You will need a screw driver to turn the 

adjusting screw. Make small adjustments until the 

desired temperature is achieved

■

Turn the adjusting screw clockwise (to the 

right)

■

Turn the adjusting screw counterclockwise 

(to the left)

The condenser fan motor turns off and on with 

the condensing unit. The evaporator fan motor 

runs continuously. The fan motors are lifetime 

lubricated and will require no oiling.

The Direct Draw Dispenser is equipped with 

a heavy-duty refrigeration system designed to 

automatically maintain a storage temperature of 

36°-41°F. The control is factory set at 38°F.

C

O

O

LE

R

OFF

1

2

3

4

5

6

COLD