Pelco ExSite Series Explosionproof Positioning System C1300M-C (11/08) ユーザーズマニュアル
36
C1300M-C (11/08)
3.
Select the alarm priority:
a.
Use the joystick to position the cursor beside ALARM PRIORITY.
b.
Press Iris Open. The cursor moves to the right.
c.
Move the joystick up or down to view the available selections. Available settings include
HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active
at the same time, the dome will only go to the alarms with the highest priority.
HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active
at the same time, the dome will only go to the alarms with the highest priority.
d.
Press Iris Open to enter selection.
4.
Set the alarm action:
a.
Use the joystick to position the cursor beside ALARM ACTION.
b.
Press Iris Open. The cursor moves to the right.
c.
Move the joystick up or down to view the available selections. The following are the
settings for alarm action:
settings for alarm action:
d.
Press Iris Open to enter selection.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
RESUME
OFF
SEQUENCE (SECS)
5
RESET DELAY (SECS)
<ALARM SETTINGS>
BACK
EXIT
EXIT
ALARMS
ALARM NUMBER
1
ALARM PRIORITY
LOW
ALARM ACTION
NONE
ACTIVATE AUX
NO
ALARM CONTACT
OFF
BACK
EXIT
EXIT
ALARM SETTINGS
HIGH
Alarm action takes highest priority and will override manual pan,
tilt, and zoom control.
tilt, and zoom control.
MEDIUM/LOW
Alarm action will not occur if an alarm occurs during manual pan,
tilt, and zoom control.
tilt, and zoom control.
NONE
No action when alarm is triggered.
PRESET
The system goes to the preset that is the same as the alarm
number. Preset 1 will go to Alarm 1.
number. Preset 1 will go to Alarm 1.
PATTERN 1
The system runs pattern 1 when alarm is triggered.
PATTERN 2
The system runs pattern 2 when alarm is triggered.
PATTERN 3
The system runs pattern 3 when alarm is triggered.
PATTERN 4
The system runs pattern 4 when alarm is triggered.
AUTO SCAN
The system starts auto scan operation when alarm is triggered.
RANDOM SCAN
The system starts random scan operation when alarm is triggered.
FRAME SCAN
The system starts frame scan operation when alarm is triggered.