Tascam SS-R1 ユーザーズマニュアル
11 − Using the RS-232C connector
TASCAM SS-R1
If you connect the SS-R1’s
CONTROL I/O
(
RS-232C
) con-
nector to the RS-232C connector of your computer, you’ll
be able to control the SS-R1 from your computer.
be able to control the SS-R1 from your computer.
You’ll use the menu to make communication-related set-
tings (for details on menu operations, refer to “Operations
in the menu screens” on page 16).
tings (for details on menu operations, refer to “Operations
in the menu screens” on page 16).
1 Press the
MENU
key to access the main menu list
screen.
2 Select the UTILITY menu.
3 Highlight the RS-232C item, and press the front
panel
˚
key (or the remote’s
CURSOR
¥
key).
The RS-232C setting screen will appear.
4 Make the appropriate setting for each item.
BAUD RATE
Specify the baud rate (communication speed).
Choose from
Specify the baud rate (communication speed).
Choose from
4800
,
9600
,
19200
, and
38440
bps
(default:
19200
).
PARITY BIT
Specify the communication parity bit setting.
Choose from
Specify the communication parity bit setting.
Choose from
NON
,
EVEN
, and
ODD
(default:
NON
).
STOP BIT
Specify the communication stop bit setting.
Choose
Specify the communication stop bit setting.
Choose
1
or
2
(bit) (default:
1
).
DATA LENGTH
Choose the communication data length.
Choose
Choose the communication data length.
Choose
7
or
8
(bit) (default:
8
).
5 When you’ve finished making settings, press the
TIME (ESC)
key (or the remote’s
CLR/ESC
key) to
return to the home screen.
NOTE
RS-232C settings are saved even when the power is
turned off.
For details on the SS-R1’s RS-232C command proto-
col, please contact TEAC Corporation’s Tascam
customer support.
turned off.
For details on the SS-R1’s RS-232C command proto-
col, please contact TEAC Corporation’s Tascam
customer support.
•
•
11 − Using the RS-232C connector