Osburn Stoves by SB I 2200 ユーザーズマニュアル

 

7

 All connector and manufactured chimney components must be 

. 

Masonry Chimneys must be 

, and have a 

 solid fuel burning liner (of stainless 

steel or clay refractory construction). 
 

 

The following are the generic components required for a factory built chimney system for 
residential installations: 

 

Chimney – in the USA use a 6” diameter (152 mm) listed UL 103 HT chimney system and 
components  

Chimney – in Canada use 6” diameter (152 mm) listed ULC S629 chimney system and components 

 

 

In addition to the requirements of section 1.5.2.1 the following components are required for 
manufactured (mobile) home installations: 

 

A spark arrestor must be employed with the rain cap 

Double walled connectors must be used instead of single walled connectors 

For manufactured (mobile) home installations in the 

 and where the chimney system has 

employed a 

, a 

 must also be used. 

 

 

In addition to the requirements of section 1.5.2.1 the following components are required for 
residential close clearances installations: 
 
Double walled connectors must be used instead of single walled connectors