Oceanic Personal Dive Computer Veo 100Nx ユーザーズマニュアル

ACTIVATION

WARNING: If the unit is activated at elevations

higher than 14,000 feet (4,270 meters), it will per-

form a diagnostic check and immediately shutdown.

To Activate the Veo 100Nx, press and release the Button.

Upon manual activation, the unit will enter Diagnostic

Mode (Fig. 13), displaying all segments of the LCD as 8's,

followed by dashes (- -), then a countdown from 9 to 0.

Diagnostic Mode checks the display and Battery voltage to

ensure that everything is within tolerance and functioning

properly.

When the button is held depressed and the Diagnostic

countdown reaches 00, a Serial Number screen appears

displaying the units Serial Number and firmware code

Revision Number as long as the button is held depressed

(Fig. 14). Upon releasing the button, the unit shuts Off.

After manual activation, it will also check the ambient

barometric pressure, and calibrate its present depth as

zero. At elevations of 2,000 feet (610 meters) or higher, it

will recalibrate itself to measure depth at that higher Alti-

tude.

Fig. 13 - DIAGNOSTIC MODE

Fig. 14 - SERIAL NUMBER