Oceanic Personal Dive Computer Veo 100Nx ユーザーズマニュアル

Wet Contact Activation (only if Wet Activation is set ON)

The Veo 100Nx will also automatically activate by Wet Contact.

This is accomplished by bridging the gap between contacts

located on the Button's stem and back of the case.

If no dive is made within 2 hours after initial activation, the unit

will automatically deactivate.  If the wet contacts are still

bridged, the unit will reactivate and display the H2O graphic.

While on the surface, the unit will automatically scroll through a

Sequence of displays including -

  Surface Mode

  Fly Mode

  DeSat Mode

  Plan Mode

As the Surface Sequence is scrolling, you can use the button to

access Log Mode and Set Mode.

Surface Mode, identified by the Surface Time icon (Fig. 15a),

follows Diagnostic Mode after Activation.  Information includes

Dive Number (0 if no dive made yet), Temperature (and icon),

Time of Day (with icon), the Battery Indicator, and Surface Time

(with flashing colon).

Fig. 15 - SURFACE MODE

(module is dry)

a