Novatel GNSS Receiver and Antenna SMART-AG ユーザーズマニュアル

This window automatically opens when CDU is first connected to a receiver. To bring 

the window to the front, select Console Window from the View menu or click its button in the 
Window Toolbar.

•

Logging Control Window: The Logging Control window provides a graphical interface for:

• Initiating data logging to a file
• Initiating logging to the receiver's serial ports 
• Specifying a time window for data logging
• Stopping logging
• Editing log settings

To display the Logging Control window, select Logging Control Window from the 

Tools menu or select its button in the Window Toolbar.

•

ASCII Messages Window: This window displays ASCII formatted NovAtel logs. 

To display the ASCII Messages window, select ASCII Messages Window from the View 

menu or select its button in the Window Toolbar.

•

Wizards: There are two wizards available: RTK and SPAN. 

The Real Time Kinematic (RTK) wizard takes you through the steps needed to set up your RTK 
system. You must have an RTK-capable receiver model or the wizard does not continue past its 
opening page.

The SPAN wizard takes you through the steps needed to set up your Synchronized Position 
Attitude Navigation (SPAN) system. You must have a SPAN-capable receiver model, or the 
wizard does not continue past its opening page. The SPAN wizard can help with the alignment or 
calibration of a SPAN system.

 To display a wizard window, if you have the necessary receiver model, select 

SPAN Wizard or RTK Wizard from the Tools menu or select one of their buttons in the Window 
Toolbar.