New Buck Corporation 81 ユーザーズマニュアル

ページ / 39
INSTALLATION, OPERATION, AND  
MAINTENANCE INSTRUCTIONS 
MODEL 81 
 
 
READ THIS FIRST 
 
IMPORTANT INSTRUCTIONS 
WARNING
 
  
THESE  UNITS  GENERATE A LOT OF HEAT, SO TREAT THEM  WITH  CARE.  HOT 
WHILE IN OPERATION
.  KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.  
CONTACT MAY CAUSE SKIN BURNS.  READ ALL INSTRUCTIONS BEFORE 
INSTALLING AND USING THE APPLIANCE.   FAILURE TO FOLLOW  INSTRUC-
TIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCES. 
 

The New Buck Corporation non-catalytic system has been tested  by Intertek Testing 
Services, Warnock Hersey  to ANSI/UL Standards :UL 1482 (1996) :UL 1482 (200) :UL 
1482 (2006) :UL 1482 (2010).  
 

Install and operate your units according to instructions provided in this manual. Local 
building codes may apply; therefore, contact your local building inspector or fire marshal 
for necessary installation requirements and permits which may go beyond these instruc-
tions. 
 

If appliance is installed in mobile homes:   
           “DO NOT INSTALL IN SLEEPING ROOMS.” 
 

NOTE: When burning  any unit or appliance that combusts fuel for heat, such as 
coal, oil, wood or natural and (L.P.) liquid petroleum gas, we highly recommend the 
use of smoke and carbon monoxide detectors in your home.              
 

Examine masonry fireplace and chimney prior to installation of fireplace  accessory to 
determine that construction meets minimum fireplace construction requirements 
illustrated in instructions, that it is free from cracks, loose mortar, creosote deposits and 
other blockage or other signs of deterioration. 
 
CAUTION
 
 DO  NOT USE MORE THAN ONE STOVE TO A CHIMNEY.  DO NOT USE A  FLUE  
INTENDED FOR A GAS APPLIANCE. DO NOT CONNECT THIS UNIT TO A CHIMNEY 
FLUE SERVING ANOTHER APPLIANCE.  DO NOT CONNECT TO ANY AIR 
DISTRIBUTION DUCT OR SYSTEM. 
 

A  factory-built pre-fabricated chimney may be used  for  your units when installed in 
compliance with manufacturer's specification and uniform building code. 
 
Page 3