Juniper Networks SRX 210 ユーザーズマニュアル
Chapter 15
Connecting the SRX210 Services Gateway
to Management Devices
to Management Devices
This chapter includes the following topics:
■
■
■
■
■
■
Connecting an SRX210 Services Gateway to the J-Web Interface
If you plan to use the J-Web interface to configure the SRX210 Services Gateway,
you must connect through one of the built-in Ethernet management ports.
you must connect through one of the built-in Ethernet management ports.
When the services gateway is powered on for the first time, the system looks for a
DHCP server. If it does not find one, the system assigns an IP address within the
DHCP server. If it does not find one, the system assigns an IP address within the
192.168.1.0/24
subnetwork to any devices connected to the system.
To connect to the J-Web interface through any of the ports
ge-0/0/1
or
fe-0/0/2
to
fe-0/0/7
on the services gateway, see Figure 27 on page 92.
Connecting an SRX210 Services Gateway to the J-Web Interface
■
91