Juniper Networks SRX 210 Manual Do Utilizador

Chapter 15

Connecting the SRX210 Services Gateway
to Management Devices

This chapter includes the following topics:

■

■

■

■

■

■

Connecting an SRX210 Services Gateway to the J-Web Interface

If you plan to use the J-Web interface to configure the SRX210 Services Gateway,
you must connect through one of the built-in Ethernet management ports.

When the services gateway is powered on for the first time, the system looks for a
DHCP server. If it does not find one, the system assigns an IP address within the

192.168.1.0/24

 subnetwork to any devices connected to the system.

To connect to the J-Web interface through any of the ports 

ge-0/0/1

 or 

fe-0/0/2 

 to

fe-0/0/7

 on the services gateway, see Figure 27 on page 92.

Connecting an SRX210 Services Gateway to the J-Web Interface

■

91