Multiquip Appliance Trim Kit MVH406DSCPAS ユーザーズマニュアル

5.  When adding hydraulic oil, only fill to the specified oil 

level as marked on the front of the hydraulic oil tank 

(Figure 7).

 dO nOT overfill.

1.  To check the engine oil level, place the compactor on 

secure level ground with the engine stopped.

2.  Loosen the wing nut (Figure 8), remove the air cleaner 

cover.

dO nOT overfill hydraulic oil tank. This could cause 

oil leaks and sluggish operation. Clean cap and 

surrounding area before opening to prevent  dirt from 

entering oil tank.

OIL LEVEL

OIL

TANK

WING

NUT

AIR

CLEANER

3.  Remove the air cleaner element (Figure 9) and inspect 

it for signs of wear or dirt. If air cleaner element is dirty, 

clean or replace element.

1.  Remove the fuel cap located on top of fuel tank.
2.  Visually inspect to see if fuel level is low.  If fuel is  low, 

replenish with diesel fuel (Figure 10 ).

3.  When refueling, be sure to use a strainer for filtration. 

dO nOT top-off fuel. Wipe up any spilled fuel.

ELEMENT

eXpLOsive FueL!
Motor fuels are highly flammable and can 

be dangerous if mishandled. 

dO  nOT 

smoke while refueling. 

dO nOT attempt 

to refuel  if the engine is hot or running.