Multiquip Appliance Trim Kit MVH406DSCPAS ユーザーズマニュアル

1.  Replace engine oil, in first 25 hours of operation and 

every 50 to 100 hours afterwards.

2.  Oil may be drained more easily when it is warm 

afteroperation (For more details, see separate engine 

Owner's Manual).

1.  The air filter element (Figure 27) should be cleaned 

because a clogged air cleaner can cause poor 

engine starting, lack of power and shorten engine life 

substantially.

2.  To clean or replace air filter loosen the wing nut on the 

air filter housing (Figure 27) remove the cover and take 

out air filter cartridge. If only cleaning of the air filter 

is desired blow through the air filter cartridge from the 

inside, moving a jet of dry compressed air up and down 

until all dust is removed.

WING

NUT

AIR

CLEANER

ELEMENT

neveR attempt to check the V-belt with the engine 

running. Severe injury can occur if your hand gets 

caught between the V-belt and the clutch (Figure 28). 

Always use safety gloves.

CLUTCH

PULLEY

VIBRATOR

PULLEY

 

„

Remove the belt cover (Figure 29). Engage an offset 

wrench 3/4”(19 mm) or the like to vibrator pulley (lower) 

fastening bolt. Engage wastecloth or the like at midway 

of V-belt on the left side and whilepulling it back strongly, 

rotate the offset wrench clockwise so that the V-belt will 

come off.

 

„

Engage V-belt to lower vibrator pulley and push the V-belt 

to leftside of upper clutch and, in the same manner as 

in removal, rotate offset wrench clockwise so that the 

V-belt goes back on.

 

„

Check the clutch simultaneously with V-belt checking. 

With belt cover removed, check outer drum of the clutch 

for seizure and "V" groove for wear or damage with your 

eyes. Clean the "V" groove as necessary. If the shoe is 

worn, power transmission becomes deficient and slipping 

will result.

 

„

Remove V-belt. Remove bolt at engine power output by 

giving a light tap with a hammer to an engaged wrench 

and rotate bolt counterclockwise. Remove clutch with a 

pulley extractor. To reinstall, reverse the procedure.

CLUTCH

V-BELT

VIBRATOR

PULLEY

When ever the compactor's vibration becomes weak 

or lost during normal operation regardless of operation 

hours, check the V-belt and clutch immediately.