Motorola Router 6161252-00-01 ユーザーズマニュアル

Currently there is a restriction that the remote user must be routed to via the WAN inter face, other wise the 
connections will fail. There is no restriction as to the number of connections.

There is no user configuration required for this feature.

You configure the MultiNAT features through the Telnet menu:

For a simple 1-to-many NAT configuration (classic NAT or PAT), use the 

, 

described below.

For the more advanced features, such as ser ver lists and dynamic NAT, follow the instructions in:

The screen below is an example. Depending on the type of Router you are using, fields displayed in this screen 
may var y.

The Local WAN IP Address is used to configure a NAT public address range consisting of the Local WAN IP 
Address and all its por ts. The public address map list is named Easy-PAT List and the por t map list is named 
Easy-Ser vers.

The two map lists, Easy-PAT List and Easy-Ser vers, are created by default and NAT configuration becomes 
effective.This will map all your private addresses (0.0.0.0 through 255.255.255.255) to your public address. 
These map lists are bound to the Easy Setup Profile. See 

.

This is all you need to do if you want to continue to use a single PAT, or 1-to-many, NAT configuration.

                   Connection Profile 1: Easy Setup Profile

         Underlying Encapsulation...        None
         PPP Mode...                        VC Multiplexed
         PPP Authentication...              PAP
         Send User Name:        tonyf
         Send Password:         ********************

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0
         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PREVIOUS SCREEN                    NEXT SCREEN

Enter basic information about your WAN connection with this screen.