Leica TPS - System 1000 1000Z01 ユーザーズマニュアル
134
TPS-System 1000 Programs-2.3.1en
© Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
To detect the targets easily, the horizontal and vertical
angle differences are shown in a special display. If these
are "turned to zero", the selected target is visible within
the field of view.
Motorized instruments sight the target automatically
after the successful measurements of the first half set.
angle differences are shown in a special display. If these
are "turned to zero", the selected target is visible within
the field of view.
Motorized instruments sight the target automatically
after the successful measurements of the first half set.
F1
F2
F3
F4
F5
F6
HELP
TELESCOPE POSITIONING
14:03
MC
Hz- and V-positioning:
Set direction(s) to zero.
Set direction(s) to zero.
∆
HZ
:
-3°56'23"
∆
V
:
1°22'25"
ABORT
OK
∆∆∆∆∆
Hz
:
Difference in horizontal direction.
∆∆∆∆∆
V
:
Difference in vertical direction
Ends the telescope positioning.
Ends the telescope positioning. Are activated if the
present telescope position is within 27' (0.5 gon) of the
expected position. This is confirmed accustically.
present telescope position is within 27' (0.5 gon) of the
expected position. This is confirmed accustically.
Further measurements follow the same rules as
described in chapter "Measure first set".
described in chapter "Measure first set".
or