Levana Melody Digital Wireless Audio Baby Monitor LV-TW200 ユーザーズマニュアル

1.  On the front of the parent unit, press and hold the Talk button. 
2.  Speak directly into the front of the parent unit, where a microphone is located.
3.  When you are finished talking, simply release the Talk button. 

1.  Press and hold the flashlight button 

 on the front of the parent unit, the LED light 

on the right side of the unit will light up.

2.  To turn off the LED flashlight, release the flashlight button 

.

1.  Press the up 

and down 

 buttons on the front of the parent unit to adjust the 

volume. One bar is the lowest volume setting, five bars is the highest setting.

This monitor has two range settings, long distance and eco, which would 
use less battery power when longer distance transmission is not required.
1.  Flip the SEDS switch on the back of the baby unit up to set the system 

to long distance transmission mode.

2.  Flip the SEDS switch to the bottom, to ECO mode when longer 

distance transmission is not required, or longer battery life is needed.

If you cannot find the parent unit and it is still powered on, you can press the page button 
on the baby unit that sounds an alarm to assist you in finding it.
1.  Press the Page button 

  on the front of the baby unit.

2.  The parent unit will sound a loud alarm. 
3.  Once you find the parent unit, you can turn off the alarm by pressing the Page button 

 on the baby unit or any button on the parent unit.