Infocus SP-CEIL-010 ユーザーズマニュアル

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Complete the following steps to install the projector mount and projector on your ceiling with the optional 
suspension adapter.  
This installation works best with high ceilings (F

 3). 

Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector 
mount with the arrow pointing toward your screen. 
6. 

Use the Allen wrench (F) to remove the upper plate from the mount assembly (D). 

7. 

Use the Allen wrench to remove the two screws from the enclosed end of the of the suspension 
adapter, and place it into the slotted extension on the upper plate (E). Make sure that the two (2) outer 
holes on the suspension adapter align with the holes on the slotted extension on the upper plate. 

8. 

Replace the two screws removed in step 2 into the two (2) holes to secure the suspension adapter to 
the upper plate. 

9. 

Attach the mount assembly to the suspension adapter and secure them with the two screws removed 
in step 1. 

10.  Secure the upper assembly to the ceiling using the commercially available hardware (E) suitable for 

your environment. Be sure that the upper assembly arrow is pointing toward your screen. 

11.  Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of 

the upper assembly (D) by its tabs.  

12.  Rotate the projector (C) with the mounting bracket (B) attached 180º

 

so that the projector’s focus ring 

is pointing toward your screen. 

13.  Align the safety knob on the mount assembly with the end of the arrow-shaped slot on the mounting 

bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the safety knob.  

14.  Hand-tighten the remaining two tension knobs to secure the mounting bracket to the amount 

assembly. 

CAUTION: Check all of the hardware for proper tightness and security. Do not over-tighten the screws. 

 

NOTE: Use the Allen wrench key (F) for the following modification 

Ceiling structure 

Wood stud 

Center of wood stud 

Solid ceiling structure  

Extension adapter

Extension adapter

Insert and rotate 180° 

and lock down 

Insert and rotate 180° 

and lock down 

Adjustable screws 

Adjustable screws 

When using the optional 

extension adapters and making 

a height adjustment while 

secured to the wall or ceiling do 

not remove the screws 

completely from the extension. 

Failure to do so could result in 

injury and damage to the 

projector.