Infocus SP-CEIL-010 ユーザーズマニュアル

 

Wall wood stud 

Wall structure  

Adjustable extension 

Adjustable screws 

 

Complete the following steps to install the projector mount and projector to your wall. (F

 4) 

Note: Look at the bottom of the upper assembly (D) and locate the arrow. Make sure you install the projector 
mount with the arrow pointing toward your screen. 
NOTE: Follow step 3 to secure the extension to the mount assembly. 
15.  Secure the upper plate to the wall using the commercially available hardware (E) suitable for your 

environment. Be sure that the screen indicator arrow is pointing toward your screen. 

16.  Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of 

the mount assembly by its tabs.  

17.  Rotate the projector (C) with the mounting bracket (B) attached 180º

 

so that the projector’s focus rings 

is pointing toward your screen. 

18.  Align the safety knob on the mount assembly with the end of the arrow-shaped slot on the mounting 

bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the securing 
knob. 

19.  Hand-tighten the remaining two tension knobs to secure the mounting bracket (B) to the mount 

assembly (D). 

CAUTION: Check all of the hardware for proper tightness and security. Do not over-tighten the screws. 

NOTE: Use the Allen wrench key (F) for the following modification 

When using the optional 

extension adapters and making 

a height adjustment while 

secured to the wall or ceiling do 

not remove the screws 

completely from the extension. 

Failure to do so could result in 

injury and damage to the 

projector.