Infocus PN-L702B ユーザーズマニュアル
Page 18
Operating the Mondopad Software
For information about the Mondopad Software, refer to the Mondopad Software Guide on the web at www.infocus.com/
Mondodocs.
Mondodocs.
INF7020 Menu System
To operate the menu, press the MENU button. Use the arrow buttons to select a menu option, enter submenus and make adjust-
ments. Press the MENU button twice to close the menu.
ments. Press the MENU button twice to close the menu.
NOTES:
• Menus differ depending on the input mode.
• After 15 seconds of inactivity, the menu screen will close automatically. The exceptions are the Date/Time Setting and Schedule
• After 15 seconds of inactivity, the menu screen will close automatically. The exceptions are the Date/Time Setting and Schedule
menus, which close after approximately 4 minutes of inactivity.
• Items that cannot be selected are grayed-out.
• You can move the menu screen position by pressing the Display button.
• You can move the menu screen position by pressing the Display button.
Screen Menu
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 67.5 kHz
AUTO
CLOCK
PHASE
H-POS
H-POS
V-POS
H-SIZE
V-SIZE
H-RESOLUTION
H-SIZE
V-SIZE
H-RESOLUTION
V-RESOLUTION
RESET
RESET
SCREEN
PICTURE
AUDIO
SETUP
OPTION
PIP/PbyP
600
25
610
37
50
50
50
1920
1080
1080
SCREEN
1/1
END···[MENU]
PC D-SUB
AUTO: Automatically adjusts the clock, phase, horizontal and vertical positioning of the PC source signals. Press the right arrow but-
ton to activate this function.
CLOCK: Adjusts the frequency of the sampling clock of PC source signals. Adjust the clock when flickering is noticeable in the form of
vertical stripes. When adjusting the clock settings, adjust until no vertical stripes are noticeable.
PHASE: Adjusts the sampling clock phase of PC source signals. Useful when small characters appear with low contrast and /or flick-
ering is noticeable at the corners of the image. When adjusting the phase settings, adjust the phase until no horizontal stripes are
noticeable.
ton to activate this function.
CLOCK: Adjusts the frequency of the sampling clock of PC source signals. Adjust the clock when flickering is noticeable in the form of
vertical stripes. When adjusting the clock settings, adjust until no vertical stripes are noticeable.
PHASE: Adjusts the sampling clock phase of PC source signals. Useful when small characters appear with low contrast and /or flick-
ering is noticeable at the corners of the image. When adjusting the phase settings, adjust the phase until no horizontal stripes are
noticeable.
NOTE:
Adjust Clock settings before adjusting the Phase settings.
H-POS: Adjusts the horizontal position of the image.
V-POS: Adjusts the vertical position of the image.
H-SIZE: Adjusts the horizontal size of the image.
V-SIZE: Adjusts the vertical size of the image.
H-RESOLUTION: Sets the horizontal resolution when the resolution of the PC source signals is not recognized properly.
V-RESOLUTION: Sets the vertical resolution when the resolution of the PC source signals is not recognized properly.
RESET: Resets the Screen menu items back to factory default settings. Select ON and press the menu button to reset.
V-POS: Adjusts the vertical position of the image.
H-SIZE: Adjusts the horizontal size of the image.
V-SIZE: Adjusts the vertical size of the image.
H-RESOLUTION: Sets the horizontal resolution when the resolution of the PC source signals is not recognized properly.
V-RESOLUTION: Sets the vertical resolution when the resolution of the PC source signals is not recognized properly.
RESET: Resets the Screen menu items back to factory default settings. Select ON and press the menu button to reset.