Infocus PN-L702B ユーザーズマニュアル
Page 19
INF7020 Hardware Guide
Picture Menu
AUTO
ANALOG GAIN
ANALOG OFFSET
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
RGB INPUT RANGE
64
86
31
30
30
30
30
12
1/2
FULL
PC D-SUB
PICTURE
SCREEN
PICTURE
AUDIO
SETUP
OPTION
PIP/PbyP
OK···[MENU]
MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 67.5 kHz
AUTO: Automatically adjusts the analog gain and analog offset settings. Press the right arrow button to activate this function.
ANALOG GAIN: Adjusts the bright portions of the PC source signal.
ANALOG OFFSET: Adjusts the dark portions of the PC source signal.
BRIGHT: Adjusts the backlight brightness. (In PIP mode, the main PIP source is affected.)
CONTRAST: Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL: Adjusts the entire brightness of the video signals.
TINT: Adjusts the green and magenta hues of the image. Selecting + changes the color towards green. Selecting changes the color
towards magenta.
COLORS: Adjusts the color intensity.
SHARPNESS: Adjusts the sharpness of the image.
RGB INPUT RANGE: Sets the RGB input signal range. When this function is set to Auto and HDMI is being used, the RGB input signal
is detected automatically. AUTO is the recommended setting. If AUTO is not working properly for your source (images appear with
washed out blacks and compressed gradients), manually set the the range.
ADVANCED:
ANALOG GAIN: Adjusts the bright portions of the PC source signal.
ANALOG OFFSET: Adjusts the dark portions of the PC source signal.
BRIGHT: Adjusts the backlight brightness. (In PIP mode, the main PIP source is affected.)
CONTRAST: Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL: Adjusts the entire brightness of the video signals.
TINT: Adjusts the green and magenta hues of the image. Selecting + changes the color towards green. Selecting changes the color
towards magenta.
COLORS: Adjusts the color intensity.
SHARPNESS: Adjusts the sharpness of the image.
RGB INPUT RANGE: Sets the RGB input signal range. When this function is set to Auto and HDMI is being used, the RGB input signal
is detected automatically. AUTO is the recommended setting. If AUTO is not working properly for your source (images appear with
washed out blacks and compressed gradients), manually set the the range.
ADVANCED:
FLESH TONE - Adjusts the hue control.
NOTE:
When this function is set to Low or High, the C.M.S.-Hue, -Saturation and -Value
cannot be adjusted.
3D-NR - Reduces the noise of playback images on video. Setting a higher level reduces more noise, but may cause blurring on
3D-NR - Reduces the noise of playback images on video. Setting a higher level reduces more noise, but may cause blurring on
the image.
MPEG-NR - Reduces noise caused by digital compression.
3D-Y/C - Specify whether to perform 3-dimensional Y/C separation. If dot interference or cross-color is occuring in fast-motion
MPEG-NR - Reduces noise caused by digital compression.
3D-Y/C - Specify whether to perform 3-dimensional Y/C separation. If dot interference or cross-color is occuring in fast-motion
scenes, selecting OFF may improve the image quality.
C.M.S.-HUE - Adjusts the tone of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-SATURATION - Adjusts the vividness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-VALUE - Adjusts the brightness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-HUE - Adjusts the tone of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-SATURATION - Adjusts the vividness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
C.M.S.-VALUE - Adjusts the brightness of the red (R), yellow (Y), green (G), cyan (C), blue (B) and magenta (M) colors.
COLOR MODE: Changes the color mode on the screen. (In PIP mode, the main PIP image is affected.) When sRGB is selected, WHITE
BALANCE, PRESET, USER, COPY TO USER, and GAMMA cannot be adjusted. When VIVID is selected, GAMMA cannot be adjusted.
WHITE BALANCE: Changes the white balance of the image. (In PIP mode, the main PIP image is affected.) When THRU is selected,
BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA, and COPY TO USER cannot be set.
BALANCE, PRESET, USER, COPY TO USER, and GAMMA cannot be adjusted. When VIVID is selected, GAMMA cannot be adjusted.
WHITE BALANCE: Changes the white balance of the image. (In PIP mode, the main PIP image is affected.) When THRU is selected,
BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA, and COPY TO USER cannot be set.
THRU - Displays the input signal level as is (for PC HDMI only).
PRESET - Selects the color temperature using PRESET.
USER - Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively.
PRESET - Selects the color temperature using PRESET.
USER - Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively.
PRESET: Selects the color temperature when the WHITE BALANCE is set to PRESET.